Specific packaging requirements

1. Compressible waste shall comply with the following criteria:

• waste must be packaged inside a metal drum

• the drum shall be minimum 100 L and maximum 160 L drum

• the drum wall thickness shall not be less than 0.6 mm

• the drum’s diameter shall not be less than 25 cm

• less than 20% elastic material in waste

• the mass of the drum contents shall not exceed the manufacturer’s safe working load.

2. Non-compressible waste must be packaged inside a metal drum and shall comply with the following criteria:

• the drum shall be a 210 L drum

• the drum wall thickness shall be not less than 0.8 mm

• the mass of the drum contents shall not exceed the manufacturer’s safe working load.

3. Uranium contaminated steel or metal waste:

• this waste shall be contained in 210 L drums or ISO containers (ship­ping containers)

• the mass of the drum contents shall not exceed the manufacturer’s safe working load.

Добавить комментарий

Ваш e-mail не будет опубликован. Обязательные поля помечены *